Garmin's 19.23 update is rolling out to the Venu 4, Venu X1 and Vivoactive 6 at the same 50 percent release stage. For most people it just adds the dog profiles and new badges plus cycling workouts. For a smaller group, it is leaving the watch half-drawn.
The complaints are specific and they line up: icons missing, shortcut buttons replaced by grey bubbles, menus showing text with no graphics next to it. On the Venu X1, the same firmware appears to be scrambling characters instead.
What owners are actually seeing
The clearest thread sits on Garmin's own Venu 4 board. The original poster updated, then found the interface "not working correctly," restarted the watch several times and switched watch faces, including a standard built-in one, with no change.
A second owner described it in more detail: almost no icons or graphics were rendering at all, only the text labels, and every shortcut icon had become a grey bubble with nothing inside it. That is the signature of the watch's graphics assets failing to load rather than the firmware crashing. The watch still works. It just looks like a wireframe.
A third owner reported the same thing plus a blank clock, and said a factory reset did not fix it. That is the detail worth paying attention to. A factory reset is the advice you would normally give first, and here it did nothing.
The fix that seems to work, and it is slow
The recovery that two owners confirmed is a reinstall of the same build, done manually.
From the watch, go to Settings > System > Software Update and check for updates. The watch then starts downloading 19.23 again, in a long series of chunks that jump from 0 to 100 percent repeatedly. One owner measured more than 1.5GB of downloads before the install prompt appeared. Another said the download alone took about an hour, with the install itself running over ten minutes.
After that second install and the automatic restart, the interface came back. "Fixed! Thanks, your suggestions worked," the original poster wrote once they got through it.
It is a strange bug when installing the update a second time fixes the update. It points at an asset package that did not land during the first flash, which would also explain why a factory reset does not help: the reset wipes user data, not the graphics partition that is missing content.
Garmin's moderators have not posted a workaround in the Venu 4 thread, which was opened by a staff member to announce the release and then locked for replies. Fixes for individual reports are happening in separate threads.
The Venu X1 version is worse to look at
The Venu X1 runs the same 19.23 build, and at least one owner is seeing something different: corrupted characters across the system. Menus, the days of the week and the Sleep Mode screen all render as garbage, with only the clock digits coming out correctly.
That owner has the watch in default English with a standard built-in watch face, only recolored, which removes the two usual suspects. Restarting several times made no difference. Reinstalling 19.23 through Garmin Express fixed the text temporarily, then it came back a few hours later, and again right after waking from Sleep Mode.
This one has an official response. A Garmin staff account asked for photos, received them, and then said it had emailed the owner for information "our team needs to create a ticket." So Garmin has acknowledged the report. It has not published a fix.
If you are keeping score, that is the same shape as the Forerunner 970 ghost touch problem we covered last week: users find it, Garmin asks for details, the thread goes quiet, and a fix shows up in a later release.
Should you install 19.23?
If your watch is on 18.32 and behaving, there is no rush. The release is at 50 percent, which means Garmin is deliberately not pushing it to everyone at once, and the dog profiles and bike coaching changes are not urgent.
If you already updated and lost your icons, the manual reinstall above is the best-documented route. It costs an hour of watching a download bar and it worked for the people who tried it.
If you get the corrupted text on a Venu X1, add your report to that thread. Garmin is still gathering cases, and the ticket only exists because one owner posted photos.
The bigger picture
Nineteen point twenty-three shipped to three watch lines at once, and the same release has produced three separate display problems: missing assets on the Venu 4, garbled characters on the Venu X1, and a timer that will not stop vibrating in auto restart mode. That is not one bug. That is a release that went out too wide, too fast.
Garmin's firmware cadence has been aggressive all year. The 24.20 build went out to the Fenix 8 family in the same window, the Forerunner 970 has an open touchscreen complaint, and each of these releases carries a changelog long enough to matter. More features per quarter means more chances for an asset bundle to land broken.
The practical takeaway is the boring one. For the next two weeks, let the rollout come to you instead of chasing it through Settings > System > Software Update, and keep an eye on the Venu 4 board before you accept the next one. If you are shopping and want to skip the whole mess for a while, the previous Venu generation is still selling on Amazon, and the Venu X1 is the model with the uglier failure mode.
We will update this if Garmin ships a fix or a statement, and if you have hit either problem, the two threads worth reading are linked below.
Sources: Garmin Forums, GUI messed up after last update, Garmin Forums, Venu 4 software version 19.23, Garmin Forums, Venu X1 19.23 displays weird characters, Garmin Forums, Venu X1 software version 19.23, Gadgets and Wearables.





