Put an Enduro 4 on a table, tap the screen, and nothing happens. Touch the metal bezel with another finger at the same time, and the display springs to life.
That is the test owners keep posting, and it is the cleanest description of a problem that has been running on Garmin's own Enduro 4 forum since the middle of October. The thread's title asks the question Garmin has not answered: firmware 6.48 bug, or hardware?
The watch in question is the $899.99 flagship Garmin launched on October 6 as a mild hardware refresh of the Enduro 3. Same 51mm case, same 1.4-inch MIP solar display, newer processor and doubled storage. None of that is the story now.
Garmin's support team has now replied twice. The second reply, posted about ten days ago, says the company has not been able to reproduce it and asks owners to upload video. Six-point-four-eight is still the shipping software, and the newest public beta, 7.19, does not mention the touchscreen anywhere in its changelog.
What owners are actually seeing
The opening post on the forum thread, titled "Firmware 6.48 - bug or hardware? - Tactile screen not reacting," lists three symptoms that all come down to the same thing:
- Tapping to enable or disable an option sometimes needs one, two, or three attempts before it registers
- The swipe back gesture sometimes does nothing on the first try
- The swipe up to the glance list fails the same way, then works
The same owner came back a day later with the detail that makes the story. The screen only responded when they touched the frame at the same time. They had tested two different Enduro 4 units and saw it on both.
Other owners in the thread confirmed it independently. One said it takes three or four attempts to wake the touchscreen and called it the first thing they noticed when setting up the watch, on the latest firmware, after a reboot, with no screen protector fitted. Another posted that they had tried every suggestion Garmin offered and the behavior had not changed.
Wearing the watch changes the symptom without fixing it. The original poster said that on the wrist the screen needs two to four taps before it starts responding, and then works about 90 percent of the time. Off the wrist, it will not respond at all without a finger on the bezel.
The reports are not confined to Garmin's forum. A video posted to r/GarminWatches by u/Jesper1988 shows the same party trick, screen dead on a table, alive the moment the bezel is touched. And in the comments under DC Rainmaker's Enduro 4 comparison review, a reader raised it on November 10, noting the reddit video and the matching forum reports.
What Garmin has said so far
Garmin's first reply, posted on October 22, was the standard script: make sure the watch software is up to date, power cycle the watch, and remove any screen protector if one is fitted.
The owner's response was blunt. All of that had been done before posting, more than once, including a factory reset. The watch does not ship with a screen protector. Reset it out of the box, try to scroll, and it still will not scroll until you touch the bezel.
The follow-up from Garmin, roughly two weeks later, was this:
We have not been able to reproduce this. But I would love to investigate this further. For this, please upload a video clearly showing the concern here.
So the current state of play is an open investigation, no confirmed cause, and no timeline. Garmin has not said whether it believes this is a sensitivity setting it can adjust in firmware or something in the hardware.
That last part matters for anyone inside a return window. If it turns out to be a grounding or shielding problem in the case design, a software update can raise sensitivity but may never fully solve it.
Why touching the bezel would change anything
Watch touchscreens are capacitive. They detect the small electrical charge your fingertip carries, and they behave best when the watch has a path to ground through your body. On your wrist, the case back and the optical sensor sit against your skin, which gives it that path.
A watch lying on a wooden table is floating. There is no ground reference, and the touch controller has less signal to work with. Touching the metal bezel with a second finger supplies the missing connection, which is exactly the behavior owners are describing.
That explanation fits the off-wrist test neatly. It does not fully explain the missed taps people report while wearing the watch, when the ground path already exists. Those reports point at something else, most likely touch sensitivity or a firmware quirk in how the first input is handled.
There is one community theory worth trying. A forum member with an Enduro 3 suggested checking Settings > Display & Brightness > Keys & Touch and setting it to On. On his watch, when the backlight was set to come on after sunset only, the first touch or swipe did nothing and the second one worked. Garmin has not confirmed that this is the same mechanism, and it will not fix the bezel behavior off the wrist, but it is a free thing to test.
It is not showing up on the Fenix 9
The Enduro 4 shares most of its internals and all of its software with the Fenix 9 family. The Enduro 4 uses the base Fenix 9 processor rather than the Pro chip, and it runs the same 6.48 firmware generation.
Owners in the thread say the same era of watches does not do this. One described the Enduro 3 as fine by comparison and returned the Enduro 4. The Enduro 2 and Fenix 8, in their experience, behave differently but remain usable. If the Fenix 9 forum is quiet on this, the difference is probably in the display stack or the case rather than the shared software, though nobody outside Garmin can say that with confidence yet.
It is also worth separating this from Garmin's broader firmware complaints. The Fenix 8 and Fenix 9 lines have had a rough autumn, including a confirmed brightness bug that drains battery and a string of crash reports. Beta 7.19 was itself a consolidation release that folded two scrapped builds into one, with 38 changes and no mention of touch sensitivity. This one is narrower and more specific: the touch layer specifically, and the bezel as an accidental workaround.
How to test yours in two minutes
If you have an Enduro 4, or you are about to buy one (it lists at $899.99 on Amazon), do this before your return window closes.
- Take the watch off and lay it face up on a table
- Tap the screen, then swipe up to the glances, then swipe back
- If nothing happens, put one finger on the metal bezel and repeat
If the second pass works and the first does not, you have the same behavior. Then try the same gestures on your wrist and count how many attempts it takes.
Garmin's support request is specific: record a video that shows the failure clearly and upload it through the support file uploader. Reports with video are what move an issue from "cannot reproduce" into a fix list. Owners who have already returned the watch, as at least one in the thread has, are the reason a fix would arrive too late for them.
Bottom line
The Enduro 4 is a $899.99 watch that Garmin launched on October 6 as the endurance flagship, and its touchscreen not responding unless you ground it against the bezel is not a premium experience. The reports are consistent, they come from more than one unit, and they have survived a factory reset.
If you are shopping in this family right now, the Enduro 3 has been sitting near $799 and does not carry any of these reports, which makes the cheaper watch the safer buy until Garmin says something definitive.
What we do not have is a cause. Garmin's own position is that it cannot reproduce the problem, which is a strange place to be when your customers can reproduce it on a kitchen table in ten seconds. Watch the beta notes closely in the next few releases. If a touch sensitivity change lands without explanation, that will be the quiet confirmation.
Sources: Garmin Forums thread 446227, Garmin Forums beta 7.19 announcement, r/GarminWatches touchscreen video thread, DC Rainmaker Enduro 4 review.





